Finished product particle size: about 400
mesh Output design: 60t/day
Finished product use: Petroleum, chemical, paint, filler and other fields
Feedback from Tanzanian customers
The barite grinding production line designed by Bellian Machine for our company has been running smoothly since it was put into production, with a high degree of automation, and various operations are also very convenient. The finished barite powder produced has a uniform particle size and meets our different requirements. , the important thing is that the total investment cost of the production line is low. In short, it is a very good barite grinding production line.
Bellian customers
- Production line process
- Project Benefits
The value of barite itself is high, but if it is processed, its comprehensive utilization rate will be greatly improved. For this reason, Bellian machine technicians explored the characteristics of barite and the local geographical location, and integrated the characteristics of materials and equipment. Affected by various factors such as , application environment, etc., a complete barite grinding production line has been designed.
Tanzania barite grinding production line
Production line process
Milling production line flow chart
1. Crushing: The barite raw material has a large particle size and needs to be crushed first. Here, a jaw crusher is used for primary crushing. After crushing, it is evenly sent to the silo by a bucket elevator;
2. Grinding: The electromagnetic vibrating feeder evenly sends the barite in the silo into the Raymond Mill for grinding to a certain mesh size;
3. Powder selection: the ground barite enters the powder classifier for classification, and the unreasonable fine powder is sent back to the Raymond mill for grinding;
4. Collection: Qualified barite powder is collected through the pipeline device, and then sent to the silo for packaging.
Milling production line equipment loading and delivery
Advantages of Tanzania Milling Production Line Project
1. The three-dimensional structure of the mill has a small footprint and strong complete sets. It forms an independent production system from block material to finished powder. It has a new type of pulse dust removal equipment with good dust removal effect and passed the environmental assessment standard;
2. The fineness of the finished powder is uniform, the sieving rate is 99%, the electrical system adopts centralized control, the grinding workshop can basically realize unmanned operation, and the maintenance is convenient.
3. The transmission device of the main engine of the milling production line adopts a closed gearbox and pulley, and the important parts are made of high-quality steel, and the wear-resistant parts are made of high-performance wear-resistant materials. The whole machine has high wear resistance, stable transmission and reliable operation.
