With the increasing scarcity of natural sand and gravel resources, artificial sand making has gradually entered people's field of vision, and the development of machine-made sand has ushered in the spring. The production of machine-made sand is inseparable from the main equipment of Sand Making Machine. The new generation of sand making machine developed by Bellian Machinery - HVI shaping and sand making machine integrates sand making and shaping, and is widely used in construction, mining, metallurgy and Highways, railways and other fields are the core equipment of the machine-made sand industry, so how to prevent the failure of the sand making machine in the sand making production?
The sand making machine has abnormal vibration during the production process:
1. The material entering the sand making machine is too large, you can check the feed particle size.
2. The impeller of the sand making machine wears unevenly. Check the wear of the impeller and the alloy hammer head, and replace it in time if necessary.
3. The impeller of the sand making machine is unbalanced and needs to be adjusted.
4. The foundation of the sand making machine is not handled properly, check the anchor bolts and tighten them.
The discharge size of the sand making machine is too large
1. Check the wear of the alloy hammer head of the sand making machine, and repair or replace the alloy hammer head.
2. Check the wear of the impact plate on the side of the sand making machine and replace it if necessary.
3. Check the feed particle size of the sand making machine. If the feed particle size is too large, it will also affect the output particle size.
Sand making machine bearing heating
1. The bearing of the sand making machine is short of oil, check and refuel in time, too much refueling will cause the bearing to heat up, and the oil level must be checked when refueling.
2. The bearing of the sand making machine is damaged, check and replace the bearing in time.
The above points are some common troubleshooting methods summarized by Bellian experts. I believe it can help you solve some problems, further improve production efficiency, and reduce the production failure rate of equipment. New year, new starting point, join the machine-made sand industry Innovation pattern.
