Cone crushers are widely used in mine crushing due to their advantages of large crushing force and high output. It is used for medium and fine crushing production of high hardness materials. Among them, the hydraulic cone crusher is improved on the basis of the traditional cone crusher. It is more powerful in terms of crushing capacity and production efficiency. The hydraulic system is its key part. Then, if the hydraulic system of the cone crusher is maintained Woolen cloth? Below, based on more than 10 years of production and maintenance experience, Bellian engineers have summarized the following maintenance tips for your reference.
1. Ensure the cleanliness of the inside of the cone crusher. Because there is a lot of dust generated during the ore processing process, it is necessary to pay attention to the removal of dust during use and prevent it from entering the hydraulic oil.
2. To ensure the cleanliness of the hydraulic system, it is recommended to use the same type of hydraulic oil for cleaning, otherwise it is impossible to cause damage to the cone crusher.
3. Replace the hydraulic oil in time. It should be noted that the filter must be used when adding hydraulic oil, and the filter must also be kept clean. When refueling, it must be appropriate and the range of the specified oil level must be followed.
4. Pay attention to the replacement time of the hydraulic oil. Bellian engineers suggest that the hydraulic oil should be replaced shortly after the cone crusher has stopped, while the hydraulic oil is still hot, so that the operating oil can be used to drain the oil and sediment, and then inject new hydraulic oil.
From the above maintenance, we can see that the replacement of hydraulic oil plays a very important role in the maintenance of the cone crusher hydraulic system, and it is also your guarantee of high production and high quality.
