The Sand Making Machine plays an irreplaceable role in the sand making of various ores, and is an effective and reliable sand making equipment at present. However, the crushed materials are hard materials such as limestone, marble, granite, etc. In production, the sand making machine will inevitably encounter various problems. Once the machine breaks down, it will affect the production efficiency. , which has an impact on economic efficiency. The following editor will introduce several common troubleshooting methods for you. When you encounter this kind of problem again, I hope it can help you.
1. What should I do if the equipment is unstable?
cause of issue:
① The wearing parts on the impeller are seriously worn;
② The feed size is too large;
③ There are obstructions in the flow channel of the impeller, which makes the feeding uneven and swings.
Solution:
① Check the wearing parts and replace them in time to balance the impeller;
② Strictly control the particle size of the feeding material, and it cannot exceed the maximum value allowed by the equipment;
③ Check the blockage on the flow channel of the impeller and take it out, and clean the crushing chamber frequently.
2. The equipment makes abnormal noise during operation
cause of issue:
The connecting bolts inside the sand making machine or vulnerable parts such as liners and impellers are loose.
Solution:
Immediately stop the machine for inspection and wipe, and reinstall the loose parts.
3. The bearing is not flexible
cause of issue:
The bearing seal cover of the sand making machine has entered the material and so on.
Solution:
Open the sealing cover and clean up foreign objects.
4. Bearing temperature rises
cause of issue:
①The bearing parts have dust, etc. entering;
②The bearing wear is serious;
③ Bearings need lubricating oil.
Solution:
① Clean up the dust in time;
②Replace new bearings;
③ Add lubricating oil in time.
5. The output particle size becomes larger
cause of issue:
① The long-term operation of the equipment causes the V-belt of the transmission part to loosen;
② The feed size is too large;
③The speed of the impeller is unreasonable and the efficiency becomes low.
Solution:
①Adjust the tightness of the V-belt or replace the V-belt;
②Strictly control the feed particle size and feed according to the standard;
③Adjust the impeller speed to a reasonable standard.
The above are several common problems in the sand making machine during operation. Don’t take it lightly during the production process. If you encounter an unexplained failure, you should stop it immediately for inspection and get in touch with after-sales personnel. Large machines like Bellian machines The manufacturer, after-sales service will rush to the scene as soon as possible, to solve your problems, perfect after-sales service, so that you have no worries.
