Raymond Mill is a common production equipment in the grinding production line, and is widely used in the grinding process of various ores such as marble, limestone, cement, gypsum, and glass.
In general, Raymond mill will continue to operate for a long time during the production process, so it is necessary to do a good job in the daily maintenance of Raymond mill.
Lubrication of key components
During the long-term operation of Raymond Mill, the material is fed between the grinding ring and the grinding roller, and then it is squeezed and rotated by the grinding roller to the grinding ring to achieve fine crushing, so the grinding ring and grinding roller are easy to grind. to be worn out.
The shovel blade of the pulverizer is mainly used for continuously shoveling the material between the grinding roller and the grinding ring. When the shovel blade continuously shovels the material, it will rub against materials of different hardness and quality for a long time, and it is also an easy-wearing part.
When the grinding ring and the grinding roller are severely worn or worn unevenly, the phenomenon of uneven fineness of the finished product will appear. Severely damaged shovel blades will not be able to shovel materials, which will affect the working efficiency of Raymond mill to a certain extent.
In order to make the Raymond mill work normally, the equipment "equipment maintenance safety operation system" should be formulated, the wear and tear of the easy-wear parts should be checked regularly, and necessary maintenance tools, grease and corresponding accessories should be provided.
Pay attention to the replacement of the grinding roller
The grinding roller bearings are refueled every shift, the main engine center bearings are refueled every 4 shifts, and the blower bearings are refueled every month. The room temperature of the bearing should not exceed 70°C. When the bearing is found to be overheated, the bearing and bearing chamber and other accessories should be removed and cleaned once.
The grinding roller device of the Raymond mill needs to be replaced after a long time of use. The rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time. The oiling tools can be manual oil pump and grease gun.
The Raymond mill produced by our company will provide customers with considerate after-sales service. The after-sales service personnel will be more aware of the overall situation of the customer's production line to estimate the use of the equipment, and promptly remind the customer to do a good job in the maintenance of the machine on a regular basis.
The Raymond mill produced by our company also has the following advantages:
Small footprint and strong suitability
The Raymond mill produced by our company can form an independent production system no matter from rough processing of raw materials, transportation or powder making and packaging.
Efficiency and stable performance
Compared with other mills, the Raymond mill produced by our company has a higher sieving rate, as high as 99%, which is difficult for other milling equipment to achieve. After improving the traditional method, the structure of the main shaft and the plum blossom frame is more stable, the transmission is stable, and the operation is reliable.
Long service life and low maintenance cost
Our company adopts high-quality casting materials and fine craftsmanship, which ensures that the wearing parts of the whole set of Raymond mill have a longer service life and good wear resistance. This greatly reduces the maintenance cost of vulnerable parts and improves the working efficiency of Raymond mill.
automated operation
The Raymond mill produced by our company adopts centralized control for the electrical system, and the grinding workshop of the Raymond mill can basically realize unmanned operation and is easy to maintain.
Bellian Machinery has been focusing on the research of Raymond mills, providing customers with high-quality Raymond mills, and providing good equipment with excellent performance for the production line!
