Every kind of mining machinery and equipment has a life span. The length of this life span will not only be affected by the quality of the equipment itself, but also be affected by human beings to a large extent. The same is true for rock crushers.
During the long-term use of the crusher, various problems such as high temperature, vibration, shutdown, and wear will inevitably occur, which will lead to a decrease in the efficiency of the crusher, affect normal production, and fail to achieve the expected processing effect. Therefore, in order to To maximize the service life of the crusher and realize the high efficiency and stable operation of the crusher, we must master some smart ideas.
Although there are many types and models of stone crushers on the market, the working principles are basically the same. Mastering some skills can make your stone crusher equipment more efficient, lower cost, and better energy-saving.
The control of the temperature of the seminal vesicle
During the operation of the crusher, the temperature of each component has a normal range, and unpredictable dangers may occur when the temperature is too low or too high.
One is to prevent overload operation at low temperature. During the low-speed preheating stage of the equipment, it is necessary to ensure its normal operation, and it can only work when it reaches the specified normal temperature.
The second is to prevent operation at high temperature. The temperature of the crusher is easy to rise after long-term use. It is necessary to check the thermometers regularly. If any problem is found, stop the machine immediately to check the cause and repair it to maintain reasonable heat dissipation of the equipment.
Purification of impurities in the seminal vesicle
Crusher impurities refer to substances such as metal shavings and wear products that affect the normal operation of the equipment. These substances entering the machine will not only cause serious damage to the equipment parts, but also seriously affect the normal processing and production of the equipment.
Therefore, for manufacturers with complex production environments, high-quality parts and reasonable lubricating oil must be selected to prevent impurities from entering. At the same time, it is necessary to do a good job in the protection of the production site, to ensure that the upper and lower processes of the production line can work normally, and to ensure the safety and environmental protection of the production site.
Decrease in Corruption of Gauge of the Vesicle
If the quality of parts is too poor or the production environment is relatively harsh, the crusher is prone to corrosion, which will increase machine failures. This kind of corrosion is very harmful to the crusher.
Therefore, the operator should take appropriate protective measures according to the geographical location and natural conditions of the production site to prevent the intrusion of rainwater into the machine and reduce the impact of corrosion on the crusher.
In order to keep your crusher in good working condition, reduce the failure rate, increase production and work efficiency, and prolong its service life, we must do a good job in the daily maintenance of the crusher to prevent the "strike" of the crusher. Bellian Machines rock crushers have a wide range of models and reliable quality that you can trust.
